Stabilizer Dissolution System | Beverage Equipment | Economy Solution
The Stabilizer Dissolution System is a crucial...
Supplier and Stocklist of Aluminium 5083 Sheets in Temper H116
5083 Aluminium Sheet
Aluminium alloy 5083 is a high-strength, non-heat-treatable alloy with excellent corrosion resistance, especially in marine environments. It is often used in applications that require high strength and resistance to corrosive environments.
| Mechanical Properties: |
|---|
| Tensile Strength: 42,000 psi (290 MPa) Yield Strength: 21,000 psi (145 MPa) Elongation: 12% |
| Physical Properties: |
| Density: (0.0975 lb/in³) Melting Range: 570°C-640°C (1058°F-1184°F) |
| Typical Uses: |
| Shipbuilding | Marine structures | Pressure vessels | LNG tankers | Armor plate | Welded structures |
| Welding: |
| 5083 is readily weldable using standard methods such as gas, electric, resistance, and spot welding. It has good weldability and excellent performance in post-weld heat treatment. |
| Corrosion Resistance: |
| It is not heat-treatable but gains strength through strain hardening. |
| Considerations |
| 5083 has excellent corrosion resistance, particularly in seawater. It is known for its high resistance to stress corrosion cracking and general corrosion in marine environments. |
5083 Aluminium Sheets
Alloy: 5083 Aluminium Alloy
Temper: O H14 H24 H18 / T351 T3 T4 T651 T6 / H14 H24 H26 H16 / H32 H111 H321 H116 H112 / T6 T651 / T651 T6 T7451
H116: Strain-hardened from a hot-worked condition, stabilized—the least amount of strain hardening with the highest flexibility.
H321: Strain-hardened from a hot-worked condition, stabilized. Similar to H116 but with improved stress corrosion resistance.
O: Fully annealed, soft condition with the lowest strength. Excellent workability for deep drawing or spinning.
Thickness: 0.2mm-300mm
Width: 500mm-3000mm
Standard: GB/ 3880-2012 ASTMB209 EN485
Surface Treatment: Mill finish / Brush polish
PVC Coated: One-side or two-side PVC
MOQ: The inventory has no MOQ
Packing: Standard Export Packing
Port of Dispatch: It depends on the supplier's location and shipping arrangements
Delivery Time: The inventory is 5-7 days. 25-30 days for customized products
Payment: TT / LC / TT+LC
Alloy 5083 Composition: |
|
| Aluminum (Al): | 91.9% |
| Magnesium (Mg): | 4.0%-4.9% |
| Iron (Fe): | 0.0%-0.4% |
| Copper (Cu): | 0.1% |
| Manganese (Mn): | 0.4%-1.0% |
| Zinc (Zn) | 0.25% |
| Chromium (Cr): | 0.05%-0.25% |
| Titanium (Ti): | 0.15% |
| Others: | 0.05% (each) 0.15% (total) |
Alloy 1100 Aluminium Sheets Alloy 1050 Aluminium Sheets Alloy 1060 Aluminium Sheets Alloy 1070 Aluminium Sheets Alloy 1200 Aluminium Sheets Alloy 2011 Aluminium Sheets Alloy 2014 Aluminium Sheets Alloy 2017 Aluminium Sheets Alloy 2024 Aluminium Sheets Alloy 3003 Aluminium Sheets Alloy 3004 Aluminium Sheets Alloy 3105 Aluminium Sheets Alloy 5052 Aluminium Sheets Alloy 5083 Aluminium Sheets Alloy 5086 Aluminium Sheets Alloy 5356 Aluminium Sheets Alloy 5454 Aluminium Sheets Alloy 5182 Aluminium Sheets Alloy 5754 Aluminium Sheets Alloy 6060 Aluminium Sheets Alloy 6061 Aluminium Sheets Alloy 6063 Aluminium Sheets Alloy 6082 Aluminium Sheets Alloy 6101 Aluminium Sheets Alloy 7020 Aluminium Sheets Alloy 7050 Aluminium Sheets Alloy 7075 Aluminium Sheets Alloy 8011 Aluminium Sheets
Please login to comment on this Post