Pest Control karama Dubai
Pest Control karama Dubai
Competitive Price of Aluminium Sheets 7075 T6,T651,O in India
7075 Aluminium Sheet
Aluminium alloy 7075 is a high-strength, heat-treatable alloy widely used in aerospace, military, and high-performance applications. Known for its excellent strength-to-weight ratio and good fatigue resistance, 7075 is often chosen for critical structural components.
| Mechanical Properties: |
|---|
| Tensile Strength: 83,000 psi (572 MPa) Yield Strength:73,000 psi (503 MPa) Elongation: 11% |
| Physical Properties: |
| Density: 2.78 g/cm³ (0.100 lb/in³) Melting Range: 475°C-635°C (887°F-1175°F) |
| Welding: |
| 7075 is considered challenging to weld due to its high susceptibility to cracking, particularly in the heat-affected zone. Welding should be approached with care, and specialized techniques may be required. |
| Corrosion Resistance: |
| 7075 has good corrosion resistance, but it is not as corrosion-resistant as some other aluminium alloys. Protective coatings can further improve its corrosion resistance. |
| Considerations |
| 7075 is known for its high strength, excellent fatigue resistance, and good machinability. The alloy is heat-treatable, allowing for enhanced mechanical properties through post-fabrication heat treatment processes. |
7075 Aluminium Sheets
Alloy: 7075 Aluminium Alloy
Temper: O H14 H24 H18 / T351 T3 T4 T651 T6 / H14 H24 H26 H16 / H32 H111 H321 H116 H112 / T6 T651 / T651 T6 T7451
T6: Solution heat-treated and artificially aged. This is the most common temper for 7075, providing the highest strength and hardness.
T73: Solution heat-treated, stress-relieved, and overaged. Offers improved toughness compared to T6.
Thickness: 0.2mm-300mm
Width: 500mm-3000mm
Standard: GB/ 3880-2012 ASTMB209 EN485
Surface Treatment: Mill finish / Brush polish
PVC Coated: One-side or two-side PVC
MOQ: The inventory has no MOQ
Packing: Standard Export Packing
Port of Dispatch: It depends on the supplier's location and shipping arrangements
Delivery Time: The inventory is 5-7 days. 25-30 days for customized products
Payment: TT / LC / TT+LC
Alloy 7075 Composition: |
|
| Aluminum (Al): | 90.7% |
| Copper (Cu): | 2.5% |
| Manganese (Mn): | 1.2% |
| Magnesium (Mg): | 1.6%-2.5% |
| Chromium (Cr): | 0.23% |
| Zinc (Zn): | 5.6% |
| Others: | 0.05% (each) 0.15% (total) |
Typical Uses:
♦ Rock climbing equipment
♦ Motorsports applications
♦ High-performance bicycle frames
♦ High-stress structural components in the defence and military industries
♦ Aircraft and aerospace components, including fuselage parts and wing structures
Alloy 1100 Aluminium Sheets Alloy 1050 Aluminium Sheets Alloy 1060 Aluminium Sheets Alloy 1070 Aluminium Sheets Alloy 1200 Aluminium Sheets Alloy 2011 Aluminium Sheets Alloy 2014 Aluminium Sheets Alloy 2017 Aluminium Sheets Alloy 2024 Aluminium Sheets Alloy 3003 Aluminium Sheets Alloy 3004 Aluminium Sheets Alloy 3105 Aluminium Sheets Alloy 5052 Aluminium Sheets Alloy 5083 Aluminium Sheets Alloy 5086 Aluminium Sheets Alloy 5356 Aluminium Sheets Alloy 5454 Aluminium Sheets Alloy 5182 Aluminium Sheets Alloy 5754 Aluminium Sheets Alloy 6060 Aluminium Sheets Alloy 6061 Aluminium Sheets Alloy 6063 Aluminium Sheets Alloy 6082 Aluminium Sheets Alloy 6101 Aluminium Sheets Alloy 7020 Aluminium Sheets Alloy 7050 Aluminium Sheets Alloy 7075 Aluminium Sheets Alloy 8011 Aluminium Sheets
Please login to comment on this Post